Maverick Suspension Up Grade Kit to 2017 X3 Turbo Specs
This kit gives you all you need to make your a-arms and mounts stronger
and the same as our new X3 kit. It has all the Super Tuff Bushings and larger diameter
steel sleeves and larger stronger bolts and nuts and wear plates. It can be used to up grade front and rear
on the Maverick to 12mm bolts.These 10.9 12mm bolts torque to 83 ft-lbs compared to the 10mm ones that torque to 47 ft-lbs
There is almost twice the clamping force with this kit. If it makes the X3 stronger it will do the same for your machine
To install the kit you need to enlarge the 10mm hole on the a-arm mounting
tabs to 12mm. This can be done by drilling to 31/64th or using a dremel tool to enlarge the hole .080
so the new bolts fit. When finished you will have a stronger more solid a-arm and mount.
